Pump - Self Priming Diaphragm - Shurflo - 1/2 MPT ports

Pump - Self Priming Diaphragm - Shurflo - 1/2 MPT ports

Write a review
$194.99
PS09
Share on Facebook Pin It

     The Shurflo Self-Priming Diaphragm Pump is the ultimate transfer pump for the home winemaker. Self-priming means the pump will pull a vacuum and draw liquid from a submerged inlet line into the pump head. The gentle action of the diaphragm mechanism minimizes oxidation and shear stress of your wine during transfers. A 110 Volt motor can transfer wine at a rate of 3 gallons per minute. There is no risk of any metallic interaction with acids in your wine as the pump head is made of food-grade, NSF approved, polypropylene and santoprene.

     Flow rate can be controlled by attaching an inline valve to the outflow side of the pump. The Shurflo's self-regulating motor prevents damage to the pump by temporarily shutting down when pressure exceeds temporarily, pump will resume operation once internal pressure falls to safe levels. Inlet and outlet ports of the Shurflo are equipped with 1/2" male NPT posts which accommodate a variety of fittings which can be purchased separately. Customers commonly purchase two hose barbs - PS48 - and two lengths of 1/2" thick wall hose - HS06

The Shurflo pump has a maximum temperature rating of 170 °F and is NOT recommended for wort production in brewing applications.

Specifications
  • Pump Design: Positive Displacement - 3 Chamber - Diaphragm pump
  • Check Valve (prevents reverse flow): Yes
  • Cam: 3.0 Degree
  • Motor: Permanent Magnet - P/N 11-195-01 - Thermally Protected
  • Voltage: 115 VAC Nominal
  • Pressure Switch: Factory set for 45 PSI shut-off
  • Max. Liquid Temperature: 170 °F - 76 °C
  • Priming: Self-priming up to 9 ft. vertical - max. inlet pressure 30 PSI / 2.1 Bar
  • Ports: 1/2" Male NPT
  • Popular Items