Water Bladder Wine Press - Stainless Cage - 47 gal - 180 L - Speidel

Water Bladder Wine Press - Stainless Cage - 47 gal - 180 L - Speidel

Write a review
$3,059.99
WE46
Share on Facebook Pin It
Speidel water bladder presses include: Complete press assembly Inner mesh bag (to keep fruit from getting in the stainless basket and make cleanup easier) Plastic spray-protection bag to keep juice from squirting out Fittings to connect garden hose Instruction manual Presses ship in a corrugated box. Minor assembly (attaching legs) is required before use Specifications for 180-Liter press: Basket height: 34 Overall height: 52 Actual weight: 212ounds
How to Use

Operating Instructions:

  1. Remove press lid.
  2. Install the included green mesh liner on the inside of the press. The mesh helps to ensure the holes of the basket don't clog as well as aiding in clean up.
  3. Place a sanitized receiving vessel under the drain spout to catch any free run.
  4. Fill mesh bag with grapes, must, or apple pulp.
  5. Re-install press lid, making sure it is secure.
  6. Cover press with plastic press shroud.
  7. Attach a hose to the water inlet. An SP04 adapter helps.
  8. Use a screwdriver to loosen the pressure relief at the top of the press.
  9. Slowly open the water flow to the press.
  10. When water comes out of the pressure relief, the bladder is full and the pressure relief should be tightened again.
  11. Pressing will now begin as the bladder expands with water. Be sure to watch the pressure gauge, keeping the pressure below 10 PSI. Excessive pressure may damage the bladder.
  12. The pressure relief valve is designed to release water if the pressure is too high. If the valve is triggered, lower the pressure from your garden hose until the valve is no longer expelling water.
  13. Pressing is complete when juice no longer flows from the drain spout. The water can now be turned off and water drained from the bladder.
  14. Take off the plastic shroud and lid, remove pomace from the basket.
  15. If more pressing is to be done, reload the press and repeat steps 1-14.
  16. Spray down all components of the press including mesh bags.
  17. Let everything dry before storage.
  18. If you haven't done so already, open a bottle of last year's wine and take time to appreciate a job well done.
Warranty
The Beverage People provides a 1 year warranty. Replacement parts available.
Shipping Details
Item is not eligible for free shipping. Standard shipping rates apply. For more information see our Shipping Policy page.

Popular Items